Then, you can
Click... honda motorcycle mufflers and you can see all the main page links and products from my homepage.

Motorcycles explained:

What is a Motorcycle? A motorized design that's based on the bicycle. The typical motorcycle has an air-cooled engine supported in a metal frame between two wheels. Sometimes a third wheel is added to support an open carriage, called a sidecar, which is attached to the motorcycle. The motor is a two- or four-cycle gasoline engine with one to four cylinders. Its piston displacement generally ranges from 50 to 1,500 cc. A very detailed description would be that it is a two-wheeled vehicle powered by an engine. The wheels are in-line, and at higher speed the motorcycle remains upright and stable by virtue of gyroscopic forces; at speeds continual readjustment of the steering by the rider gives stability. The rider sits astride the vehicle on a seat, with hands on a set of handlebars which are used to steer the motorcycle, in conjunction with the rider shifting their weight through their feet, which are supported on a set of "footpegs" or "pegs" which stick out from the frame.

The first motorcycle, designed and built by German inventors Gottlieb Daimler and Wilhelm Maybach in Cannstatt (a city district of Stuttgart) in 1885 was the first petroleum-powered vehicle ever. They called their invention Reitwagen ("riding car"). British manufacturers held a dominant position in this market until the rise of the Japanese manufacturers (led by Honda) in the late 60's and early 70's who were able to produce designs faster and cheaper.

The chassis is typically made from welded aluminium or steel struts, with the rear suspension being an integral component in the design. Some motorcycles include the engine as a load bearing (or stressed) member; this has been used all through bike history but is now becoming more common. The fuel tank is usually mounted above the engine. This tank is generally made of stamped, brazed or welded sheet steel, or blow-molded high-density polyethylene. The wheel rims are usually steel, either with steel spokes and an aluminium hub, or 'mag' type sandcast aluminium. Performance racing dirt bikes often use carbon-fibre wheels, but the expense of these wheels is prohibitively high for general usage.

Important Motorcycle Safety Tips:

Follow these safety tips to make motorcycle riding both fun and safe!

Before You Ride:
-Familiarize yourself before you ride. Read and understand the instruction manual and observe all safety and warning labels. Check the controls.
-Wear the proper clothing/pads including helmet, elbow pads, knee pads, wrist guards, gloves and shoes.
-Check the equipment including the nuts and bolts, steering, brakes and controls, frame (for stress and fractures) and tires (for wear). Inspect your dirt bike thoroughly before each use for loose or missing parts.

When Riding You should:
1.Always wear a helmet and other protective gear.
2.Never ride on public roads - another vehicle could hit you.
3.Never ride under the influence of alcohol or other drugs.
4.Never carry a passenger on a single-rider vehicle.
5.Ride a motorcycle that's right for your age. The guidelines are:
a. Age 6 and older - Under 70cc
b. Age 12 and older - 70cc to 90cc
c. Age 16 and older - Over 90cc
6.Supervise riders younger than 16
7.Ride only on designated trails and at a safe speed.

For more precise honda motorcycle mufflers info, here are my official, No bull, No fluff links related to your search so I really recommend checking these out now:

Motorcycle Questions and Answers, Tips, Troubleshooting:

Motorcycle Paper Cartridge Air Filters

First of all, be aware that on some engines, the air flows in from the underside of the filter, so you may need to remove it to see just how dirty it is. A quick glance from the outside may overlook a mess underneath.

Pre-cleaners Many engines built today will have a thin foam pre-cleaner installed in front of the paper cartridge filter and if serviced frequently, not only it will help protect the engine, it will also extend the life of the paper filter as well.

1. Remove the air filter and separate it from the pre cleaner if so equipped.

2. Tap the paper filter on a solid surface in order to shake loose the heavier deposits.

3. If the filter is not too dirty you can use compressed air from the back side of the filter to blow the remaining dirt from the pleats of the paper element.