Then
Click... Cheap New Dirt Bike and you can see all the main page links and products from my homepage.

Dirt Bikes explained:

What is a Dirt Bike? A lightweight motorcycle designed for use on rough surfaces, such as dirt roads or trails. Sometimes, it's also called a trail bike. It's designed chiefly for recreational or work use over roadless, rugged terrain. A very detailed description would be that it is a two-wheeled vehicle powered by an engine. The wheels are in-line, and at higher speed the dirt bike remains upright and stable by virtue of gyroscopic forces; at lower speeds continual readjustment of the steering by the rider gives stability. The rider sits astride the vehicle on a seat, with hands on a set of handlebars which are used to steer the motorcycle, in conjunction with the rider shifting their weight through their feet, which are supported on a set of "footpegs" or "pegs" which stick out from the frame.

Sport models are often built with a mind towards motocross or dirt track racing, either in the design of the machine or at least in the marketing of it. To be successful at motocross racing, it must have light weight, high power, good suspension and a low center of gravity. There are many other types of riding and racing such as Baja (desert racing), hill climbing, and trail riding.

The chassis is typically made from welded aluminium or steel struts, with the rear suspension being an integral component in the design. Some motorcycles include the engine as a load bearing (or stressed) member; this has been used all through bike history but is now becoming more common. The fuel tank is usually mounted above the engine. This tank is generally made of stamped, brazed or welded sheet steel, or blow-molded high-density polyethylene. The wheel rims are usually steel, either with steel spokes and an aluminium hub, or 'mag' type sandcast aluminium. Performance racing dirt bikes often use carbon-fibre wheels, but the expense of these wheels is prohibitively high for general usage.

Some of the most popular manufacturers of dirt bikes are:
-Honda
-Kawasaki
-KPX
-Yamaha
-Suzuki

Important Dirt Bike Safety Tips:

Follow these safety tips to make riding both fun and safe!

Before You Ride:
-Familiarize yourself before you ride. Read and understand the instruction manual and observe all safety and warning labels. Check the controls.
-Wear the proper clothing/pads including helmet, elbow pads, knee pads, wrist guards, gloves and shoes.
-Check the equipment including the nuts and bolts, steering, brakes and controls, frame (for stress and fractures) and tires (for wear). Inspect your dirt bike thoroughly before each use for loose or missing parts.

When Riding You should:
1.Always wear a helmet and other protective gear.
2.Never ride on public roads - another vehicle could hit you.
3.Never ride under the influence of alcohol or other drugs.
4.Never carry a passenger on a single-rider vehicle.
5.Ride a dirt bike that's right for your age. The guidelines are:
a. Age 6 and older - Under 70cc
b. Age 12 and older - 70cc to 90cc
c. Age 16 and older - Over 90cc
6.Supervise riders younger than 16
7.Ride only on designated trails and at a safe speed.

For more precise Cheap New Dirt Bike info, here are my official, No bull, No fluff links related to your search so I really recommend checking these out now:

Dirt Bike Questions and Answers, Tips, Troubleshooting Section:

You’re on your way out of the brush after a rain-drenched weekend. The waterhole you crossed on the way in looks a lot bigger. Before you know it, you’re in so deep the engine sputters.

The rule of thumb is that if the water is up to the seat, you’re in trouble because it means (on most machines) the air intake is underwater. The immediate course of action is to jump off the bike and try to raise the front end to prevent the engine from stalling. If the engine does shut off and the exhaust is submerged, it will pull water into the cylinder. Try to manoeuvre the machine back to shallower water and get it out of there in a hurry. If it shuts off while submerged, you’ll need to drain the carburetor, remove the spark plug to dry it and tip the entire quad so that the water can drain out of the cylinder.